drains, and spins.
Using Drain and Spin
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push in the Cycle Control Knob and
turn clockwise to SPIN, as illustrated.
2. Pull out the Cycle Control Knob. The
washer drains, then spins.
What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to
selected load size) before agitation and timing
start. The washer begins agitating immedi-
ately after filling (agitation occurs with the
washer lid up or down). After agitation starts,
WASH
Fill
Wash selected time
Drain+
No agitation
+ The Permanent Press cycle partially
drains, fills, agitates briefly, and drains.
PJ
LA.
Spin
the Cycle Control Knob turns clockwise until it
points to OFF and the cycle ends.
NOTES:
l The washer pauses briefly during the
Permanent Press cycle. This pause is
normal for washer operation.
RINSE
Fill
Drain-No agitation
Spin-Spray rinse
LJ
5T!dt
Spin
7