Filter
Top Products
Straight power cord
1. Remove power plug and yellow strap from machine base
to release the rear leveling system.
2. Firmly grasp the power cord and pull to completely remove
the power cord, cord restraint, and pin from the rear panel.
3. Conrm that the power cord restraint (A) and pin (B)
are removed.
4. To remove the power cord from the cord restraint, push the
power cord in, press TAB, and then pull the power cord out.
Looped power cord
1. Firmly grasp the yellow shipping strap and pull until both ends
are completely removed from washer.
2. Check that two (2) cotter pins were removed with the shipping
strap.
Straight power cord
A.Powercord restraint
B.Pin
A
B
Looped power cord
5