Filter
Top Products
Lint Removal and Cleaning
Continued
I
Heat Inlet
I
Thern!ostat
duct
ElectrIcal
SUPPlY
Motor
Clean lint gathered inside the dryer.
Lint can gather inside the dryer and
create a
FIRE HAZARD. This lint
should be removed at least every
2
to 3 years, or more often,
depending on dryer usage.
Electrical Shock and
Personal Injury Hazard
l Unplug the power supply cord
or turn off the electrical power
before lint removal.
l Do not put hands inside the
cabinet.
l Make sure the dryer is cool.
l More than one person is
required to lift, tilt or move the
washer/dryer because of its
weight and size.
Failure to do so could result in
electrical shock, injury or
damage.
Cleaning should be done only by a
qualified person.
1.
Unplug unit from electrical supply
or turn off electrical power.
2. Remove back panel from dryer.
3. Avoid touching wires and thermostats.
4. Remove lint from boxed-in area with
a soft brush or vacuum cleaner.
5. Replace back panel, reconnect and
level the Thin Twin.
Cleaning the dryer window
Use spray glass cleaner and a soft
cloth when cleaning the window in the
dryer door.
l
Make sure the dryer is cool.
l
Follow directions provided with the
cleaner.
l
Wash, rinse and dry well.
NOTE:
See the Laundry Guide for
additional cleaning information.
20