Filter
Top Products
Additional Dryer Features
Gentle tieat system
For better fabric care, the Gentle Heat
system helps prevent overdrying.
Drying temperatures are automatiilly
reduced to a bwer heat setting during
the last few minutes of drying.
Gentle Heat is followed by a cool-
down period in all cydes to make your
clothes easier to handle. 3
FINISH GUARD’ setting
3
r,
‘5
/
=-
\
\
When you are unable to remove a bad
from the dryer as soon as it stops,
wrinkles ten form. FINISH GUARD
tumbles the bad, without heat, every 5
minutes for up to 40 minutes. This
tumbling rearranges and fluffs the bad
to help avoid wrinkles that set in when
the bad remains in the drum.
You do not have to set the Cycle
Control Knob for FINISH GUARD.
FINISH GUARD takes over automati-
cally to proted the bad if you do not
open the door within 5 minutes after
the PERMANENT PRESS cycle stops.
A signal will sound every 5 minutes
during FINISH GUARD, for up to 40
minutes. The signal will stop when the
dryer door is opened.
End-of-cycle signal
The dryer sounds a signal to let you
know when the cycle is finished. The
signal cannot be turned off and is not
adjustable.
The signal is helpful when you are
drying permanent press, synthetics
and other items that should be taken
out as soon as the dryer stops.