Filter
Top Products
Lint screen
Clean the lint screen before each load.
A screen blocked by lint can
Increase drying time and may be a FIRE HAZARD.
Open the lid and pull the lint screen
ROLL
the lint off the
;creen
straight out
wrth your fingers.
0
DO NOT run the
dryer with
DO NOT
rrnse or wash the screen.
the lint
screen loose,
Push the screen firmly back into
damaged or missing.
place.
Doing so can cause over-
heating, can damage fabrics and
can be a FIRE HAZARD.
Lint removal
Lint can gather Inside the dryer and create a fire hazard
This lint
should be removed every 2 to 3 years, or more otten, depending on
dryer usage.
Heat
Element
ELECTRIC DRYERS
--Funnel
Cleaning should be done only by a qualified person.
0
l
Avoid electrical shock
hazard - unplug power
1.
Remove back panel (electrrc) or
front panel (gas]
supply cord or turn off
electrical power.
2. Avoid damaging wires, ther-
mostats, funnel or igniter.
’ Avoid injury or damage - do not
put hands inside cabinet.
l
Make sure dryer is cool.
3. Remove lint from shaded area -
see art - with a so17 brush or
vacuum cleaner.
4. Replace panel; reconnect and re-
level dryer.