Filter
Top Products
Operating Instructions
Continued
Fhe PERMANENT PRESS
cycle
The PERMANENT PRESS cycle helps
provide the special care that perma-
nent press
and
synthetic fabrics need.
The cycle consists of a timed period of
heated drying and a 10 minute cool-
down period. During the cool down,
the load tumbles without heat. This
helps keep wrinkles from setting and
makes the load easier to handle.
NOTE: To help reduce wrinkling,
remove the load from the dryer as
soon as tumbling stops. This is
important for permanent press, knits
and synthetic fabrics.
Using FLUFF AIR
Fire Hazard
Do not dry plastic or rubber
items with heat. Use FLUFF AIR
setting, or line dry.
Failure to do so could result in
fire or damaged items.
The dryer does not heat when the
Temperature Selector is set on FLUFF
AIR. This setting can be used to fluff or
air dry bedding, plastic tablecloths,
foam rubber pillows, stuffed toys,
sneakers, etc.
1. Turn the Temperature Selector to
FLUFF AIR.
2. Turn the Cycle Control Knob to the
desired number of minutes you
want in the PERMANENT PRESS
cycle.
3. Push the Start Button.
NOTE: Repeat steps above if more
time is needed to dry items.