Filter
Top Products
Drying times
Mixed loads
Drying times will vary depending on:
l
amount of moisture in the clothes.
l
type and weight of the fabric.
l
size of the load.
l
room temperature around the dryer.
l
temperature of the wash rinse water.
l
amount of lint in the lint screen.
l
dryer temperature selection.
See page 6 in your “Dryer Guide” for
more information.
When drying a load with different
kinds and weights of fabrics, use the
cycle suggested for the lightest fab-
rics When the dryer stops, remove dry
items and reset the control.
End-of-cycle signal
The dryer sounds a signal to let you know when
the cycle is finished. The signal cannot be turned
off and is not adjustable.
The signal is helpful when you are drying per-
manent press, synthetics and other items that
should be taken out as soon as the dryer stops.
a
@sl
Lint signal
Clean lint screen before each load. If you
neglect to clean your lint screen, the signal will
sound. The (whistle tone] signal lets you know
the air flow is being restricted. Restricted air flow
reduces drying efficiency.
Turn off the drver and clean the lint screen as
shown on page9
8