Filter
Top Products
Additional Dryer Features
Gentle Heat System
The dryer automatically reduces the
heat settings in HEAVY HIGH and
PERM’T PRESS MED. During the last
few minutes of each of these tempera-
ture settings the dryer temperature
gradually reduces to a lower heat
setting. This helps prevent overdrying.
FINISH GUARD@ setting
When you are unable to remove a load
from the dryer as soon as it stops,
wrinkles can form.
FINISH GUARD tumbles the load,
without heat, every 5 minutes for up to
40 minutes. This tumbling rearranges
and fluffs the load to help avoid
wrinkles that set in when the load
remains in the drum.
You don’t have to set the Cycle
Control Knob for FINISH GUARD.
FINISH GUARD takes over automati-
cally to protect the load if you don’t
open the door within 5 minutes after
the PERMANENT PRESS cycle stops.
A signal will sound every 5 minutes
during FINISH GUARD, for up to 40
minutes. The signal will stop when the
dryer door is opened.