Filter
Top Products
loading your
Dryer ,+--
-
lint Screen
The lint screen IS under the Ild on
top of The dryer
F=r best drying resbI+s and energy
savings, sor’ dryer loads carefully
Separate loads accordng to
+he type of fabric and weight For
example
l
Dry heave fabrics (denims. towels,
cottons) separately from light fabrics
(permanent press, syrthetlcs]
l
Separate lint givers (towels sweat-
shirts, etc ) from lint takers (synthetics,
blends, permanent press]
l
Keep dark colors and lIgh+ colors
separate
l
Keep colorfast items awav from non-
colorfast fabrics
Allow room for Items to tumble
freely The load WIII dry faster with fewer
wrinkles
When drying permanent press,
dry smaller-than-normal loads for the
best wrinkle removal
Use a mesh bag to hold small
items such as baby socks
Read the Dryer Guide for more
hints on sorilng and loading
C/ecr; the !lnt screen before etch
iood A screen that’s blocked by lint
can cause longer dryng times
To remove the screen, open the
IId and pull the screen straight out Roll
the lint off the screen wtth your fingers.
DO NOT rinse the screen or wash
iv. Wet lint IS hard to remove.
When replacing the screen, push
It firmly Into place Close the IId.