Filter
Top Products
’ Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drying time and may be a FIRE HAZARD.
-5gz.zg+
R”.d+, -0: j
Open the lid and pull the lint screen
straight out.
ROLL the lint off the screen with
your fingers.
I
DO NOT rinse or wash the screen.
Push the screen firmly back into
place.
Lint removal
Lint can gather inside the dryer and create a FIRE HAZARD. This lint should
be removed at least every 2 to 3 years, or more otten,
depending on dryer usage.
ELECTRIC DRYERS
GAS DRYERS
Cleaning should be done only by a qualified person.
1. Remove back panel (electric)
or lower access panel (gas].
2. Avoid damaging wires,
thermostats, funnel or igniter,
3. Remove lint from shaded area -
see art-with a soft brush or
vacuum cleaner.
4. Replace panel; reconnect and
re-level dryer.
9