Filter
Top Products
Lint screen
Clean the lint screen before each load. A SCIC
‘n blocked by llnl can
increase drying time and ma\/ oe a FIRE HAZARC
Open the Ild and pull the lint screen
ROLL the II off the screen
sfrolght out
with VOL -ingers
8
DO NOT run the dryer with
DO NOT rl1 ,e or wash Ihe screen
the lint screen loose.
Push the
zreen firmly back Into
damaged or missing.
place
Doing so can cause over-
heating, can damage fabrics aad
can be a FIRE HAZARD.
Lint removal
Lint can gather InsIde the ::1ryer and create c re hazard This lint
should be removed every 2 to 3 years, or morm often, depending on
dryer usage.
ELECTRIC DRYERS ” ( AS DRYERS
Cleaning should be done only by a I qualified person.
0
l
Avoid electrical shc,ck 1. Remo ? back panel (electric) or
hazard - unplug power
front r, rnel (gas]
supply cord or turn off 2. Avold iamaglng wires, Iher-
electrical power. mosta funnel or lgnlter
’ Avoid injury or damage - dc not
3. Remo s? lint from shaded area -
put hands inside cabinet.
seear -
with a soft brush or
’ Make sure dryer is cool.
vacua 7 cleaner
4. Repla e panel reconnect and re-
level t ‘yer
9