Filter
Top Products
Lint screen
Clean the lint screen before each load.
A screen blocked by lint can
increase drying time und may be a FIRE HAZARD.
Open the lid and pull the lint screen
straight out.
ROLL
the lint off the screen with
your fingers.
DO
NOT rinse or wash the screen.
Push the screen firmly back into place
Lint removal
Lint can gather inside the dryer and create a
FIRE HAZARD. This lint should
be removed at least every 2 to 3 years, or more often, depending on
dryer usage.
ELECTRIC DRYERS
GAS DRYERS
Cleaning should be done only by a qualified person.
WARNING:
0
l
Avoid electrical shock
hazard ‘- unplug power
supply cord or turn off
electrlcal power.
l
Avold Injury or damage-do not
put hands inside cabinet.
l
Make sure dryer is cool.
1.
Remove back panel (electric]
or lower access panel [gas].
2. Avoid damaging wires,
thermostats, funnel or igniter.
3. Remove lint from shaded area -
see art - with a soft brush or
vacuum cleaner.
4. Replace panel; reconnect and
re-level dryer.
9