Filter
Top Products
Thermoet+o
Heat elenleull
Electrk dryer with back panel removed
I
Gas dryer with lower front
access panel removed
Lint removal
Lint can gather inside the dryer and be
a fuel for fire. tt is recommended the lint
be removed every 2 to 3 years, or more
often, depending on dryer usage.
Cleaning should be done by a qualified
person. lf you have any questions,
please call our Consumer Assffancs
Center at 1-800-253-1301.
Injury.
ElectrIcal Shock and
Personal Injury Hazard
l Unplug the power supply cord
or turn off the electrlcal power
before removlng dryer panels.
l Make sure the dryer Is cool.
l Dryer parts can have sharp
edges. Use care when handllng.
Failure to do so could result In
ektrksl shock or personal
1.
Unplug the power supply cord or turn
off the electrical power.
2. Remove back panel (electric) or
lower front access panel (gas). See
Installation Instructions.
3. Remove lint from shaded area with a
soft brush or vacuum deaner. Avoid
damaging wires, thermostats
(electric), funnel (gas) or igniter
(gas).
4. Replace panel; reconnect and relevel
dryer, i-f necessary.