Filter
Top Products
Caring For Your Dryer
Cleaning the lint screen
The lint screen is inside the dryer drum, on the back wall. Clean it before each
load. A screen blocked by lint can increase drying time.
1. Use the finger holes to pull the lint
screen straight out.
2. Lightly squeeze the body, as shown,
while pulling the cover off.
3. Roll lint off the screen with your
fingers. Do not rinse or wash the
screen. Wet lint is hard to remove.
4. Replace the cover on the body of the
lint screen.
5. Before replacing the lint screen,
remove any lint from the wire mesh
on the back wall (behind the lint
screen).
6. Push the lint screen straight back
until it clicks into place.
Cleaning the dryer interior
.
Electric shock hazard. Unplug the
power supply cord or turn off the
electrical power before cleaning
the interior. Failure to do so could
result in electrical shock or injury.
Garments which contain unstable dyes,
such as denim blue jeans or brightly
colored cotton items, may discolor the
dryer interior. If the interior is discolored,
clean with one of the following methods
to avoid staining later load items.