Filter
Top Products
3
INSTALLATION INSTRUCTIONS
Tools and Parts
Tools needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
■ Flat-blade screwdriver
■ #2 Phillips screwdriver
■ Adjustable wrench
■ Wire stripper (direct wire
installations)
■ Level
■ 1/4" nut driver
■ Vent clamps
■ Caulking gun and
compound (for installing
new exhaust vent)
■ Tin snips (new vent
installations)
■ Wood block
Parts supplied
Remove parts package from the dryer drum. Check that all parts
listed are included.
■ 1 - Cycle Control (timer) knob
■ 1 - Push to Start button
■ 4 - Leveling legs
Parts needed
Check local codes, existing electrical supply and venting, and
see “Venting Requirements” and “Electrical Requirements”
before purchasing parts.
Mobile home installations require
■ Metal exhaust system hardware. For information on ordering,
please refer to the “Assistance or Service” section. You may
also contact the dealer from whom you purchased your dryer.