Filter
Top Products
Using
your Dryer
1. Put the sorted load in the dryer
and close the door tightly.
2. Turn the Cycle Control Knob to
the cycle you want.
l
IJse LIGHT for small loads of light-
deignt fabrics The LIGHT Cycle runs for
ti?e least time Use LIGHT also to damp
dry lads for ironing
l
Jse MED for normal size loads of IigW
or medium weight fabrics (sheets, p~l-
bwcoses shirts etc ‘I
l
Use YEA’JY for normal size loads of
i?eavy fabrics (towels, jeans. corduroys
l
Jse EX HEAVY for large loads or for
hleavv bulky Items (quilts, sr>reads. blur-
Kets etc 1
SUGGESTION:
YOS con set the Cycle Control Knob
onywhere post between or below
the EX HEAVY and LIGHT settings For
the f rst few loads
l
Set the pointer In th’e mIddIe of the
load setting
l
If the load IS drier thar you wont
set ,t to the righ’ (for less time) tqe
next time
l
If t”le oad IS -lot OS dry as yod
want set I to the left [for more time
the next time
For example:
l
Jse PERMANENT PRESS for a longer
per od of cool-down time Set +Qe
oointer for the number of minutes of
dn/ing time you wont [See Setting
Drying Imes on page 6 1,
l
If laundv IS left in the dryer after I+ has
stopped tumbling, use the Tumble
Press Control setting [page 6’ to Wp
remove the tirlnkles
3. Set TEMPERATURE SELECTOR.
l
Turn the
TEMPERATURE SELECTOR to
We dryng temperature needed for
tb,e load See page 5 for suggested
settings
4. Push the Start Button.
l
Make sure the door IS closed and
Cycle Control IS set If the door IS
opened dciring the cycle, the dryer will
stop
To restart the dryer,
close the
door and push the Start Button
5. To stop the dryer:
l
Open the door
l
Or turn the Cycle Control Knob to one
of the OFF postlons
l
To change the setting while the
dryer is running,
turn the Cycle Control
Knob either way so it points to the set-
tlng you wont
NOTE: The Cycle Control Knob
should point to OFF when the dryer is
not being used.
IMPORTANT To help reduce wrir-
kling, take the load from the dryer OS
Important for permanent press, knits