Filter
Top Products
Drying tips
The dryer does not heat when the
Temperature Selector is set on FLUFF
AIR. This setting can be used to fluff
bedding, plastic tablecloths, foam
rubber pillows, stuffed toys, sneakers,
etc
1. Turn the Temperature Selector to
FLUFF AIR.
2. Turn the Control Knob to the num-
ber of minutes you want in the
TIMED DRYING Cycle.
3. Push the START Button.
TUMBLEPRESS" Setting
The TUMBLE PRESS setting removes
wrinkles from dry clothing such as
items thcit may have been packed
in a suitcase, closet, or items not
removed from the dryer.
FINISH
GUARD@‘Setting
When you are unable to unload the
dryer as soon as it stops, wrinkles can
form.
If you don’t open the door within 5
minutes after the dryer stops, FINISH
GUARD takes over automaltcally to
protect the load. You don? have to set
the Control Knob tor FINISH GUARD.
FINISH GUARD tumbles the load,
without heat, every 5 minutes for up to
40 minutes. This tumbling rearranges
and fluffs the load to help avoid the
wrinkles that set in when the load
remains in the warm dryer.
1. Set Control Knob to TUMBLE PRESS.
2. Set Temperature Selector to PERM’T
PRESS / MED.
3. Push START Button.
The load will tumble in heated air
for 10 minutes. The heat shuts off and
the dryer continues to tumble the
load for 5 more minutes.
For best results, TUMBLE PRESS only
a few items at a time. Put them on
hangers or fold them as soon as the
dryer stops.
7