Whirlpool LE7000XK Clothes Dryer User Manual


 
Using the
Automatic
Settings
With AUTOMATIC REGULAR and
AUTOMATIC PERMANENT PRESS, you
select how dry you want the loud to be
When the load IS as dry as the setting
you hove selected, the Cycle Control
WI!/ advance toward ending the cycle
Use the AUTOMATIC REGULAR
Cycle to dry most family loads During
the last five minutes of the drying cycle,
the load IS tumbled without heat This
helps make the load easier to handle.
Use the AUTOMATIC PERMANENT
PRESS Cycle to dry permanent press,
knits and other synthetic fabrics. The lost
10 minutes of the drying cycle are with-
out heat This cool-down time helps
keep wrinkles from setting in
For the first few loads, set the
Cycle Control Knob to point in the mrd-
die between VERY DRY and LESS DRY
When the dryer stops, feel the
Items In the load If they are about how
you like them, keep using this setting
If the Items are drier than you like,
use a setting nearer LESS DRY or COOL
DOWN the next time you dry a load like
that
If the Items are not as dry as you
want, use a setting nearer VERY DRY the
next time you dry a load !ike that
After drying a few< loads, you WIII
find a favorite setting to use
FLUFF AIR
This temperature setting IS useful
for fluffing beddrng plliows and cloth-
rng, or dusting drapes It IS also best
to use when damp-drying heat-sensitive
items
6
FLUFF AIR should be used for such
Items as plastic shower curtarns or
tablecloths rubber-backed rugs, some
pillows, stuffed toys, etc
l
Turn the
TEMPERATURE SELECTOR to
FLUFF AIR
l
Turn the Cycle Control Knob to the
number of minutes you wan+ in the
TIMED DRYING Cycle
TUMBLE PRESS
Control
This setting IS useful for removing
wrinkles from packing in suitcases or
closets TUMBLE PRESS will help put them
back into their pre-set shape
l
Set Cycle Control Knob to TUMBLE
PRESS
l
Set
TEMPERATURE SELECTOR
to
PERM’T PRESS MED or HEAVY HIGH
l
Push the Start Button
For best results, TUMBLE PRESS
only a few Items at a time, put them on
hangers or fold them as soon as the
dryer stops
End-of-Cycle
Signal
A signal will let you know that
the dryer has stopped.
The signal IS helpful when you are
drying permanent press, synthetics
and other Items that really should be
taker, out as soon as the dryer stops
The signal can’t be turned off and
It IS not adiustable