Filter
Top Products
Drying times
Mixed loads
Drying times will vary depending on:
When drying a load with different
l amount of moisture in the clothes.
kinds and weights of fabrics, use the
. . * . . . . . . . _
l type and weight of the fabric.
l size of the load.
cycle suggesrea ror me llgnresr rao-
rics. When the dryer stops, remove dry
items and reset the control.
l room temperature around the dryer.
l temperature of the wash rinse water.
l amount of lint in the lint screen.
l dryer temperature selection.
See in your “Dryer Guide” for
more information.
End-of-cycle signal
The dryer sounds a signal to let you know when
the cycle is finished. The signal cannot be turned
off and is not adjustable.
The signal is helpful when you are drying per-
manent press, synthetics and other items that
should be taken oui as soon as the dryer stops.
&’ f.., signal
UJ
0
0
Clean lint screen
before each load.
If you
neglect to clean your lint screen, the signal will
sound. The (whistle tone] signal lets you know
the air flow is being restricted. Restricted air flow
reduces drying efficiency,
Turn off the dryer and clean the lint screen as
shown on page 9.