Filter
Top Products
Drying tips
The dryer does not heat when the
Temperature Selector is set on FLUFF
AIR. This setting can be used to fluff
bedding, plastic tablecloths, foam
rubber pillows, stuffed toys, sneakers,
etc.
1. Turn the Control Knob to the number
of minutes you want in FLUFF AIR.
2. Push the START Button.
FINISH GUARD Setting
When you are unable to unload the
dryer as soon as it stops, wrinkles can
form.
If you don’t open the door within
5 minutes after the dryer stops, FINISH
GUARD takes over automatically to
protect the load. You don’t have to set
the Control Knob for FINISH GUARD.
FINISH GUARD tumbles the load,
without heat, every 5 minutes for up to
40 minutes. This tumbling rearranges
and fluffs the load to help avoid the
wrinkles that set in when the load
remains in the warm water.
TUMBLE PRESS” Setting
The TUMBLE PRESS setting removes
wrinkles from dry clothing such as
items that may have been packed
in a suitcase, closet, or items not
removed from the dryer.
1. Set Control Knob to TUMBLE PRESS.
2. Set Temperature Selector to PERM’T
PRESVMED.
3. Push START Button.
The load will tumble in heated air
for 10 minutes. The heat shuts off and the
dryer continues to tumble the load
for 5 more minutes.
For best results, TUMBLE PRESS only a
few items at a time. Put them on hang-
ers or fold them as soon as the dryer
stops,
Gentle Heat
The dryer automatically reduces the
heat settings in HEAVY HIGH and PERM’T
PRESS MED cycles. During the last 7
minutes of each of these cycles, the
temperature gradually reduces to a
lower setting. This helps prevent
overdrying.