Filter
Top Products
1
. Select a CYCLE
2
Set
n
TEMPERATURE SELECTOR
Turn the Control Knob either way to
point to the cycle and setting you
want. See page 6 for information on
the cycles.
3
. Push the START Bulton
The dryer will start tumbling when you
push the START Button.
if the START Button is pushed when the
Cycle Control Knob is pointing to an
OFF area, the End-of-Cycle Signal will
sound. Dryer will not start.
The Cycle Control KI
If the dryer is stopped
Knob to OFF.
nob should point
before the cycle
Turn the Temperature Selector to the
needed drying temperature
To stop and restart
the dryer
To restart the dryer, close the door,
select cycle, if necessary, and push
START.
to OFF when the dryer is not in use.
.-.._ __ _. - -- ~~
turn the Control
IS msnea, turn me cycle Control