Whirlpool LE6400XS Clothes Dryer User Manual


 
Drying tips
The dryer does not heat when the
Temperature Selector is set on FLUFF
AIR. This setting can be used to fluff
bedding, plastic tablecloths, foam
rubber pillows, stuffed toys, sneakers,
etc.*
1.
Turn Temperature Selector to
FLUFF AIR.
2. Turn Control Knob to the number
of minutes you want in the TIMED
DRYING CYCLE.
3. Push START Button.
Mixed loads
When drying a load with different
kinds and weights of fabrics, use the
cycle suggested for the lightest fab-
rics. When the dryer stops, remove dry
items and reset the control.
TUMBLE PRESS” Setting
The TUMBLE PRESS setting removes
wrinkles from dry clothing such as
items that may have been packed
in a suitcase, closet, or items not
removed from the dryer.
1. Set Temperature Selector to PERM’T
PRESS/HEAVY HIGH.
2. Set Control Knob to TUMBLE PRESS.
3. Push START Button.
The load will tumble in heated air
for 5 minutes. The heat shuts off and the
dryer continues to fumble the load
for 10 more minutes.
For best results, TUMBLE PRESS only a
few itemsat a time. Put them on hang-
ers or fold them as soon as the dryer
stops.
Drying times
Drying times will vary depending on:
l
amount of moisture in the clothes.
l
type and weight of the fabric.
l
size of load.
l
room temperature around the dryer.
l
temperature of the wash rinse wafer.
l
amount of lint in the lint screen.
l
dryer temperature selection.
See your “Dryer Guide” for
more information.