Filter
Top Products
Drying tips
JMBLE
PRESS” Setting
The dryer does not heat when the
Temperature Selector is set on FLUFF
AIR. This setting can be used to fluff
bedding, plastic tablecloths, foam
rubber pillows, stuffed toys. sneakers,
etc.
The TUMBLE PRESS setting removes
wrinkles from dry clothing such as
items that may have been packed
in a suitcase, closet, or items not
removed from the dryer.
1. Turn the Temperature Selector to
FLUFF AIR.
2. Turn the Control Knob to the num-
ber of minutes you want in the
TIMED DRYING Cycle.
3. Push the START Button.
1. Set Temperature Selector to PERM’T
PRESS/HEAVY HIGH.
2. Set Control Knob to TUMBLE PRESS.
3. Push START Button.
The load will tumble in heated air
for 5 minutes. The heat shuts off and
the dryer continues to tumble the
load for IO more minutes,
For best results, TUMBLE PRESS only
a few items at a time. Put them on
hangers or fold them as soon as the
dryer stops.
Mixed loads
When drying a load with different
kinds and weights of fabrics, use the
cycle suggested for the lightest
fabrics. When the dryer stops, remove
dry items and reset the control.
Drying times
Drying times will vary depending on
l
amount of moisture in the clothes.
l
type and weight of the fabric.
l
size of the load.
l
loom temperature around the
dryer.
l
temperature of the wash rinse
water.
l
amount of lint in the lint screen.
l
dryer temperature selection.
See page 6 in your”Dryer Guide”
for more information.
7