Filter
Top Products
loading your
For best dryng results and energy
savrngs, sort dryer loads carefully.
Separate loads according to
the type of fabrrc and weight. For
example
l
Dry heavy fabrrcs (denims, towels,
cottons) separately from light fabrics
(permanent press, synthetics)
l
Separate lint givers [towels, sweat-
shirts, etc.) from lint takers [synthetics,
blends, permanent press).
l
Keep dark colors and light colors
separate.
l
Keep colorfast items away from non-
colorfast fabrics.
Allow room for Hems to tumble
freely. The load WIII dry faster wrth fewer
wrinkles.
When drying permanent press,
dry smaller-than-normal loads for the
best wrinkle removal.
Use a mesh bag to hold small
items such as baby socks.
Read the Dryer Guide for more
hints on sorting and loading.
-,
lint Screen
The lint screen is under the Itd on
top of the dryer.
C/eon
the hnt screen before each
iood A screen that’s blocked by lint
can cause longer dryrng times.
To remove the screen, open the
lid door and pull the screen straight
out. Roll the lint off the screen with your
fingers. DO NOT rinse the screen or
wash it. Wet lint is hard to remove.
When replacing the screen, push
it firmly into place. Close the lid.