Filter
Top Products
Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drying time and may be a FIRE HAZARD.
Open the lid and pull the lint screen
ROLL the lint off the screen
straight out.
with your fingers
0
DO NOT run the dryer with
DO NOT rinse or wash the screen.
the lint screen loose,
Push the screen firmly back into
damaged or missing.
place.
Doing so can cause over-
heating, can damage fabrics and
can be a FIRE HAZARD.
Lint removal
Lint can gather rnsrde the dryer and create a fire hazard. This lint
should be removed every 2 to 3 years, or more otten, depending on
dryer usage.
ELECTRIC DRYERS
Cleaning should be done only by a qualified person.
0
l
Avoid electrical shock
hazard - unplug power
1. Remove back panel (electric] or
front panel (gas].
supply cord or turn off
2. Avoid damaging wires,ther-
electrical power.
mostots, funnel or igniter.
’ Avoid injury or damage - do not
3. Remove lint from shaded area -
put hands inside cabinet.
see art - with a soft brush or
l Make sure dryer is
COOI.
vacuum cleaner.
4. Replace panel, reconnect and re-
level dryer.
9