Filter
Top Products
Drying tips
The dryer does not heat when the
Temperature Selector is set on FLUFF
AIR. This setting con be used to fluff
bedding, plastic tablecloths, foam
rubber pillows, stuffed toys, sneakers.
etc.
1. Turn the Temperature Selector to
FLUFF AIR.
2. Turn the Control Knob to the num-
ber of minutes you wont in the
TIMED DRYING Cycle.
3. Push the START Button.
Mixed loads
When drying a load with different
kinds and weights of fabrics, use the
cycle suggested for the lightest
fabrics. When the dryer stops, remove
dry items and reset the control.
TUMBLE PRFSS@ Setting
The TUMBLE PRESS setting removes
wrinkles from dry clothing such OS
items that may hove been pocked
in a suitcase, closet, or items not
removed
from the drvpr
1. Set Temperature Selector to PERM’T
PRESS/HEAVY HIGH.
2. Set Control Knob to TUMBLE PRESS.
3. Push START Button.
The load will tumble in heated
ai-
for 5 minutes. The heat shuts off and
the dryer continues to tumble the
load for 10 more minutes.
For best results, TUMBLE PRESS only
a few items at Q time. Put them on
hangers or fold them as soon OS the
dryer stops.
Drying times
Drying times will vary depending on
l
amount of moisture in the clothes.
l
type and weight of the fabric.
l
size of the load.
l
room temperature around the
dryer.
l
temperature of the wash rinse
water.
l
amount of lint in the lint screen.
l
dryertemperature selection.
See page 6 in your”Dryer Guide”
for more
informotinn
VI I.
7