Filter
Top Products
Operating instructions
Dryer cycles and settings Cool down times
The PERMANENT PRESS Cycle helps
provide the special care that perma-
nent press and synthetic fabrics
need...a period of heated drying
followed by a IO mrnute cool down.
The chart on page 4 suggests time
and temperature settings for different
krnds of loads,
The EX HEAVY, HEAVY, MEDIUM and
LIGHT cycles describe the loads
they are designed to dry.The chart
on page 4 tells what is meant by
EX HEAVY, HEAVY, MEDIUM and LIGHT
loads.
At each setting, the dryer will run
about long enough to dry the load
described by the setting. Example:
The HEAVY Cycle is designed to be
long enough to dry a load of heavy
fabrics [towels, jeans, corduroys, etc.)
when the Temperature Selector is set
on PERM’T PRESS/HEAVY HIGH.
I
f MOPETIME LESSTIME -b
I
If the load is not as dry as you want,
set the dial more to the left the next
time you dry that kind of load.
If the load is dryer than you want,
set the dial more to the right the next
time you dry that kind of load.
In all cycles, the heat shuts off
before the dryer stops tumbling. This
cool down time helps:
l
keep wrinkles from setting in.
l
make handling the hot load items
easier.
I
lo GNUTES
5 MlNUiES
COOL DOWN
COOL DOWN
I
The PERMANENT PRESS Cycle has
10 minutes of cooldown time at the
end of the cycle.
411 other cycles have 5 minutes of
cool down time.
6