yourDryer
1. Put the sorted load in the dryer
and close the door tightly.
2. Turn the Cycle Control Knob to
the cycle you want.
l
Use LIGHT for sma I loads of light-
weight fabrics The LIGHT Cycle runs for
the least time Use LI’GHT also to damp
dry loads for lronrng
l
Use MED for norm& size loads of light
or medium weight fabrrcs [sheets, pii-
lowcases. shirts, etc )
l
Use HEAVY for normal size loads of
heavy fabrrcs (towels, jeans, corduroys\
l
Use EX HEAVY for large loads or for
heavy bulky Items (quilts spreads blar-
kets, etc ]
SUGGESTION:
You can set the Cycle Control Knob
anywhere past, between or below
the EX HEAVY and LIGHT settings For
the ftrst few loads
l
Set the pornter lr the middle of the
load setting
l
If the load IS drier than you wont,
set it to the rrght (for less time1 the
next time
l
If the load IS not as dry as you
want, set tt to the left [for more time;
the next time
For example:
l
Use PERMANENT FRESS for a loriger
period of cool-down time Set the
pointer for the number of minutes of
dn/ing time you wont [See Setting
Dn/lng rimes on page 6 1
l
If laundry
IS
left in the dryer after it has
stopped tumbling, use the Tumble
Press Control setting (page 6: to help
remove the hrinkles
3. Set TEMPERATURE SELECTOR.
l
Turn the
TEMPERATURE SELECTOR to
the drying temperoture needed for
the load See page 5 for suggested
settings
4. Push the Start Button.
l
Make sure the door IS closed and
Cycle Control IS set If the door IS
opened during the cycle the dryer wrll
stop
To restart the dryer,
close the
door arid push the Start Button
5. To stop the dryer:
l
Open the door
l
Or, turn the Cycle Control Knob to one
of the OFF postions
l
To change the setting while the
dryer is running,
tdrn the Cycle Control
Knob, either way so It points to the sei-
tlng you want
NOTE: The Cycle Control Knob
should point to OFF when the dryer is
not being used
IMPORTANT To help reduce wrin-
kling take the load from the dryer as
soon as tumbling stops This IS very
Important for permanent press, knits
and other synthetic fabrics