Filter
Top Products
Lint screen
Clean the lint screen before each 1oad.A screen blocked bv lint can
increase dr
time and may be a FIRE HAZARD.
Open the lid and pull the lint screen
straight out.
a
DO NOT
run the dryer with
the lint screen loose,
damaged or missing.
Doing so can
cause over-
ROLL the lint off the screen
with your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into
place.
heating, can damage fabrics and
can be a
FIRE HAZARD.
Lint removal
Lint can gather inside the dryer and create a fire hazard. This lint
should be removed every 2 to 3 years, or more otten, depending on
dryer usage.
ELECTRIC DRYERS
Cleaning should be done only by a qualified person.
0
l
Avoid
electrical shock
hazard - unplug power
supply cord or turn off
electrical power.
’ Avoid injury or damage - do not
put hands inside cabinet.
l Make sure dryer is
cool.
1. Remove back panel (electric] or
front panel (gas).
2. Avoid damaging wires, ther-
mostats. funnel or igniter.
3. Remove lint from shaded area -
see art-with a soft brush or
vacuum cleaner.
4. Replace panel; reconnect and re-
level dryer.
8