Filter
Top Products
Lint screen
The lint screen
is inside the dryer
drum, on the
back wall. Clean
it before each
load. A screen
blocked by lint
3. Roll lint off the
screen with
your fingers
DO NOT rinse
or wash the
screen. Wet I
lint is hard to
1.
2.
Pull straight
can increase
remove.
drying time.
Squeeze body;
out. pull cover off.
Use the finger holes to pull the lint
4. Replace the cover on the body of
screen straight out
the lint screen
Lightly squeeze the body, as
5. Push the lint screen straight back
shown, while pulling the cover off
in until it clrcks into place
Lint removal
Lint can gather inside the dryer and cre
should be removed at least every 2 to 3
on dryer usage.
tate a FIRE HAZARD. This lint
years, or more often, depending
ELECTRIC DRYERS
GAS DRYERS
Cleaning should be done only by a qualified person.
1. Remove back panel (electric)
or lower access panel [gas)
2. Avoid damaging wares,
thermostats, funnel or igniter
3. Remove lint from shaded area -
see art- with a soft brush or
vacuum cleaner
4. Replace panel. reconnect and
re-level dryer
7