Filter
Top Products
Lint screen
The lint screen
is inside the dryer
drum, on the
back wall. Clean
it before each
load. A screen
blocked by lint
Pull straight
can increase
out.
drying time.
1. Use the finger holes to pull the lint
screen straight out.
2. Lightly squeeze the body, as
shown, while pulling the cover off.
3.
4.
5.
Roll lint off the
screen with
your fingers.
DO NOT rinse
or wash the
screen. Wet
lint is hard to
remove.
Squeeze body;
pull cover off.
Replace the cover on the body of
the lint screen.
Push the lint screen straight back
in until it clicks into place.
Lint removal
Lint can gather inside the dryer and create a FIRE HAZARD. this lint
should be removed at least every 2 to 3 years, or more often, depending
on dryer usage.
ELECTRIC DRYERS
GAS DRYERS
eaning
should be done only by a qualified person.
1. Remove back panel (electric)
or lower access panel (gas].
2. Avoid damaging wires,
thermostats, funnel or igniter.
3. Remove lint from shaded area -
see art-with a soft brush or
vacuum cleaner.
4. Replace panel; reconnect and
re-level dryer.