Filter
Top Products
Lint screen
The lint screen
3. Roll lint off the
is inside the dryer
screen with
drum, on the
your fingers.
back wall. Clean
DO NOT rinse
il before each
or wash the
load. A screen
scree’n. Wet
blocked bv lint
lint is hard to
PIN straight
can increase
out.
drying time.
1. Use the finger holes to pull the lint
screen straight out.
2. Lightly squeeze the body, as
shown, while pulling the cover off.
remove.
Squeeze body;
pull cover off.
4. Replace the cover on the body of
the lint screen.
5. Push the lint screen straight back
in until it clicks into place.
0
CAUTlON: RUNNING THE DRYER WITH THE LINT SCREEN LOOSE,
PAM~D OR MISSING CAN CAUSE OVERHEATING, DAMAGE TO
FABRfCS AND DRYER PARTS, OR CREATE A CM& HAZARD.
Lint removal
Lint can gather inside the dryer and create a fire hazard. This lint
should be removed every 2 to 3 years, or more often, depending on
dryer usage.
ELECTRIC DRYERS
GAS DRYERS
Cleaning should be done only by a qualified person.
WARNING:
l
Avold electrical shock
hazard - unplug power
supply cord or turn off
1. Remove back panel (electric]
or lower access door (gas).
2. Avoid damaging wires,
thermostats, funnel or igniter.
- - ._ .
electrical power.
l
Avoid inJury or damage-do not
put hands Inside cabinet.
l
Make sure dryer is cool.
3. Remove lent from snaaea area -
see art-with a soft brush or
vacuum cleaner.
4. Replace panel; reconnect and
re-level dryer.