Filter
Top Products
l Terrc3erobre o+ tile rtqse mater Cola
rinses help save on energy and wren-
Kles, but o cold load WII’ take slightly
;onger to dry than a dorm one
l
Amoclnf or Id oi; +be screen
A full
lint screen slows the a;r flow and
~a’
make dryng time longer
l
Room temperature
The dryer heats
room air If the room air temperature IS
not above 45 F [7 2 C), dryrng time WIII
be longer and removal of wrinkles may
be poor
\
3
l Jropef
~nstaiiation ond exhaust sys
‘ems For the fastest possible drytng
time, lnstolllng and exhausting your
?,r‘i/er properly IS important See instal
‘ation lnstructrons
SELECTING A DRYING TEMPERATURE
The chart below has suggested fabrrc loads and dryng temperatures
TYPE OF LOAD
DRYING TEMPERATURES
COTTONS
HEAW-
Bedspreads, mattress pads, qurlts. towels, work clothes.
denims
HEAT
MEDiUMAND IIGHJWtlGHJ
- Shirts, dresses, sheets, diapers
HEAT
PERMANENT PRESS
HEAW
- Work clothes, lockets, ralncoats. etc
MFDiUMWEiGHT - Shirts, unrforms. dresses, slacks, etc
KNITS
HEAT
HEAT
MAWMIGHT-
COTTONS, RAYONS, BLENDS-T-shorts, slacks, polo
shirts, etc
IIGHTWf/GH~-SYNTHETIC FIBERS’(polyester, acrylrc. etc.) AND
HEAT
BLENDS- Lingerre. blouses, dresses, etc
HEAT
DELICATELY CONSTRUCTED FABRICS - Sheer curtains (2 or 3 oanels)
HEAT
FOAM RUBBER ARTICLES
AIR
HEAT SENSITIVE FABRICS
Olefrn nylon etc AIR
To damp dry Items for rrorlng, set the Cycle Control Knob for 15 to 25 mrnutes in the
HEAT Cycle.
MIXED LOADS
If you dry a load with mrxed fabrrc weights. select a trme for the lrghtest one, When the
dryer stops, take out the dry Items and restart the dryer