Filter
Top Products
Washer connections
1. Portable one faucet
connection:
Use the hose connector provided
with the washer for a one faucet
connection,
To connect washer:
l
Lift the hoses off the storage rack on
the back of the washer.
l
Attach the hose connector to the
faucet adapter by pulling down on
the locking collarwhile lifting up
on the connector, until it snaps into
place.
l
Slowly turn the water faucet on
to full.
l
Pull the electric power cord from
storage area in the back of the
washer.
l
Plug the power cord into a
grounded outlet.
To disconnect washer:
l
Unplug the electric power cord
and put it back in its storage area.
l
Turn the water faucet off.
l
Press the red Water Flow Button to
release the water pressure.
l
Move the locking collar down and
pulldown on the connector.
.
.
Drain water from the hoses through
the hose connector.
t-tang the hoses on storage rack.
2. Portable two faucet
connections:
If you have two separate water
inlet hoses and a drain hose, your
washer can be connected to both
hot and cold water faucets.
Connecting the washer:
l
Connect the hot and cold water
inlet hose to the hot and cold
faucets.
l
Secure the drain hose to the sink
or standpipe.
l
Plug the power cord into a
grounded outlet.
To disconnect the washer:
l
Turn water faucets off.
l
Unplug power cord and return it to
storage area.
l
Disconnect the drain water supply
hoses. Hang them on the storage
rack.
3. Permanent installation:
This washer can be converted from
portable to permanent. Instructions
for permanent installation come with
the washer.
You will need two fill hoses, one
drain hose and four leveling legs.
These can be purchased from your
Whirlpool Dealer.