Filter
Top Products
Your autorr~at~c washer 1s easy to
use. To make it even easier, read the
following steps before starting your first
load
Start your washer after you put in
detergent, the load, and any other
laundry ads according to information
on page 3.
1.
Set the TEMPERATURE SELECTOR.
l
Match the wash water temperature to
the type of fabrics and soils being
washed All rinses are cold
2. Select a Cycle and Start the
Washer.
l
Push the Cycle Control Knob in and
turn It to the right 1,clockwise)
l
Stop when the pointer IS on the r;u~~
ber of mninutes you wont in the cycle you
want
l
Instructions for which cycles to use for
each fabric type are under the lid.
l
To start the washer, pull the Cycle
Control Knob out When the cycle IS
over, the washer will stop
l
To stop the washer at any time
during a cycle, push the Control
Knob in.
Pull it out to restart the washer
l
To change a setting,
push the Con-
trol Knob In to stop the washer. Then
turn the Control Knob to the right (clock-
wise) to the setting you want. Pull the
knob out to start the washer
3. To Use Less Wash Water.
When you have only a few items
to wash, you may want to use less water
to help save energy. Setting the washer
to f//i with iess wafer o/so sets it for a
shorter agitation time
l
The washer will ftll to tts highest level
(about 15.3 gallons or 57.9 liters) when
the Control Knob points to a fill area