Filter
Top Products
Using Your Washer
Start your washer after you put in
detergent, the load, and any other
laundry aids according to InformatIon
on page 3.
1. Select a cycle and start the
washer.
l
Push the Cycle Control Knob in and
turn it to the right (clockwise).
l
Stop when the pointer IS on the num-
ber of minutes you want In the cycle you
want
l
Instructions for which cycles to use for
each fabric type are under the lid
l
To start the washer, pull the Cycle
Control Knob out When the cycle IS
over, the washer will stop.
l
To stop the washer at any time
during a cycle, push the Control
Knob in.
Pull it out to restart the washer
l
To change a setting,
push the Con-
trol Knob in to stop the washer. Then
turn the Control Knob to the right (clock-
wise) to the setting you want. Pull the
knob out to start the washer.
2.
To adjust the wash water
temperature.
t
l
Hot wash
can be selected only in the
REGULAR HEAVY Cycle Push In and
turn the Cycle Control Knob so it points
to the HOT FILL area. Pull the Control
Knob out to start.
l
Warm wash
can be selected in the
REGULAR ‘HEAVY Cycle. Push in and
turn the Cycle Control Knob so it points
to the WARM FILL area. PulI(the Control
Knob out to start.