Filter
Top Products
Starting your washer
Before starting your washer:
I. Measure and add detergent.
2. Place sorted load in washer.
3. Start washer.
Select a
1. LOAD SIZE
Select WATER
2.
TEMPERATURES
l
Turn the knob to point at a setting
that describes the size of load you
want to wash.
l
Set the knob anywhere on or be-
tween EX SMALL (a few items] and
LARGE (a full load].
NOTE: Use the LARGE water level
for best permanent press results.
l
Match the wash water temperature
l
Match the wash water temperature
to the type of fabrics and soils being to the type of fabrics and soils being
washed. washed.
l
All
l
All rinses are cold.
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
0
DO NOT
little water can cause wear or
OVERLOAD WASHER.
tearing of load items.
‘Approximate
fill with load.
LARGE (17.3 gals.165.5 L)’
MED (13.4 gals./50.8 L)’
EX SMALL (9.5 gals./36.0 L)’