Filter
Top Products
/
Select a
3. FABRIC selector
A.
Other selections. If you want a
cycle other than REG ‘HEAVY, touch
a different FABRIC selector within 8
seconds after turning on POWER
SWITCH
l
For agrtation and spin speeds in
each cycle, see pages 8 through 13
C.
If an indicator light does not
glow after a selector is touched:
l
The selector was not touched on
the lower half. Touch selectors
only in lower area beneath light.
l
The 8-second selection time ran
out.
l
The option you chose can’t be
combined with the FABRIC selec-
tion. See page 7 for more details.
B.
For more time. Touch HOLD if
you want more time to decide on
another selection.
l
HOLD will stop the washer while
you make another selection. Then
push RUN.
D.
Changing a Selection. Before
the washer starts, touch another
selector. This cancels the selection
you don’t want.
If the washer has started, move the
POWER SWITCH to OFF.
l
Then start back at Step 1 on
page 4.
5