Filter
Top Products
Starting your washer
1
Measure aFsd adU detergent
2 Place sorted load In washer
3 Start washer
Select a
Select WATER
1. LOAD SIZE
2.
TEMPERATURES
l
To change the setting on the LOAD
SIZE SELECTOR, turn the knob to RESET
l
Then turn the knob to point at a
setting that describes the srze of the
load you want to wash.
l
Set the knob anywhere on or be-
tween HAND WASHABLE [a few smdrl
items) and EX LARGE (a full load)
See your “Laundry Guide” for details
on load sizes.
l
Select wash and rinse water tem-
peratures by pushing a button.
* Thus drawing shows a warm wash
(top temperature] and cold rinse
(bottom temperature) selection.
Recommended wash temperatures
can be found in your “Laundry Gu’
LOAD SIZES AND WATER LE\ELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or toe
little water can cause wear or
tearing of load items
0
CAUTION:
DO NOT
OVERLOAD WASHER.
*Approximate
fill with load.
EX-LARGE (20.5 gals 77.6 L)’
MEDIUM (13 9 gals. 52.6 L)’
HAND WASHABLE (78 gals 295 L)’