Filter
Top Products
Using your Washer
1
Your automatic washer IS easy to
use. To make it even easrer. read the
following steps before sfarting your first
load.
Start your washer after You put In
detergent, the load, and any other
laundry aids according to information
on page 3 and page6.
1.
Set the LOAD SIZE SELECTOR.
l
Select the water level that matches
the srze of the load. See page 5 for
more rnformation
l
To change the seitrng on the
LOAD
SIZE SELECTOR,
first move rt to RESET.
Then move it back to the setting
you
want.
IMPORTANT: For the best cleaning
results with the least wrinkling, make
sure the load has enough water for
2. Set the TEMPERATURE SELECTOR.
l
Match the wash and rinse water tem-
peratures to the type of fabrrcs and soils
being washed. (See the instructions
under the washer lid and on page 14 in
your loundry Guide
l
Be sure to use a cold rinse for PERMA-
NENT PRESS and KNITS GENTLE Cycles.
A
2
3. Select a Cycle and Start the
Washer.
l
Push the Cycle Control Knob in and
turn it to the right (clockwise).
l
Stop when the pointer is on the num-
ber of minutes of washing you Want
in the cycle you want.
l
Instructions for which cycles to use for
which fabrics are under the Ild.
l
To start the washer, pull the C;YL~le
Control Knob out. When the cycle
IS
over, the washer will stop.
l
To stop the washer at any time
during a cycle, push the Control
Knob in.
Pull ii out to restart the washer
l
To change a setting,
push the Con-
trol Knob in to stop the washer. Then turn
the Control Knob to the right (clockwrse)
to the setting You want. Pull the knob
out to start the washer.
l
Pages 8-11 show what happens in
each cycle.