Filter
Top Products
If you need service or assistance, we suggest
you follow these four steps:
1. Before calling
for assistance.. .
Performance problems often re-
sult from little things you con find
and fix yourself without tools of any
kind.
IF YOUR WASHER DOES NOT FILL:
l
Is the power supply cord
plugged In?
l
Are both water faucets open3
l
Are fuses blown or circuit-breaker
tripped?
l
Are the water supply
hOSeS
kInked
l
Is the Cycle Control Knob set and
pulled out7
IF YOUR WASHER DOES NOT SPIN:
l
Is the lid closed?
l
Is the power supply cord
plugged In?
. Is a fuse blown or clrcult-breaker
tripped?
IF YOUR WASHER STOPS DURING
THE PERMANENT PRESS CYCLE:
l
Remember,the washer will stop
for about 1’ 2 minutes after the
partial drain during the cool-
down period in this cycle
IF WASHER FILLS AND DRAINS
WITHOUT RUNNING:
* Make sure thatthe Cycle Control
Knob is pointing to a number In
the cycle
MAKE SURE THE DRAIN HOSE IS
HIGHER THAN THE WATER LEVEL IN
THE WASHER. IF IT ISN’T...
* The washer may seem to be
draining during wash and rinse
cycles
. Water con siphon out. (See “ln-
stollation Instructions”)
14