Filter
Top Products
Operating instructions
Starting Your Washer
Be sure to measure and add detergent, then place
a sorted load in the washer before starting it.
1
. Select
a
LOAD SIZE
l Turn the knob to point at a setting
that describes the size of load you
want to wash.
l Set the knob anywhere on or be-
tween EX SMALL (a few small items)
and EX LARGE (a full load).
l To change the water level after the
washer has started to fill, turn the knob
to RESET, then the desired water level.
NOTE:
Use the EX LARGE water level
for best permanent press results.
2
Select
. WATER TEMPERATURES
l Select wash and rinse water tem-
peratures by pushing a button.
l This drawing shows a warm wash
(top temperature] and cold rinse
(bottom temperature] selection.
Recommended wash temperatures
can be found in your Laundry Guide.
NOTE:
Use warm water with the
PERMIT PRESS or KNITS GENTLE cycles.
For heavily soiled permanent press
or knit clothes, pre-wash or pre-soak
before washing in warm water.
NOTE:
For best washing results, items should move freely in the washer. Do not
overload the washer or choose a water level that is too low for your wash load.
For best results with permanent press clothes, use the EX LARGE water level.
Reduce wash time when using EX SMALL or SMALL water level settings. Loads
with only a few small items need less wash time for best results.
4