Filter
Top Products
!
I I
Other operating
instructions
For a rinse and spin
For a drain and spin
You may need on extra rinse and
spin for heavily soiled loads which
need more detergent. (Extra detergent
con require on extra rinse.)
1.
Push Control Knob in.
2. Turn clockwise to any
l
on the dial.
See above drawing.
3. Pull Control Knob out. The washer
will fill to selected level; agitate 2
minutes; drain and spin.
Your washer con be set to drain and
spin out wafer.
1.
Push Control Knob in.
2. Turn clockwise to the bar just before
the OFF area in any cycle. See
above drawing.
3. Pull Control Knob out. The washer
will drain and spin.
For agitation and spin speeds in each cycle, see pages 6-11.
For a soak
1.
Use recommended amount of
detergent or presoak product.
2. Push Control Knob in.
3. Turn clockwise to point to the
number
in the SOAK Cycle.
4. Pull Control Knob out. The
washer will start.
For best results, use
warm
water
for soaking or pre-washing stained
laundry.
Hot water can set StainS.
5. When the cycle is over, add
detergent for the next selected
wash cycle.
The SOAK Cycle
should always be followed by
a Wash Cycle.
important: See additional care
Information In your “Laundry
Guide!’
‘To start soak with agitation, the Control Knob
must point to Q number in the SOAK Cycle.
12