Filter
Top Products
If you need service or assistance, we suggest
you follow these four steps:
I. Before calling
for assistance.. .
Performance problems often re-
sult from little things you can find
and fix yourself without tools of any
kind.
IF YOUR WASHER DOES NOT FILL:
l
Is the power supply cord
plugged rn3
l
Are fuses blown or crrcurt-breaker
trapped?
l
Are the water supply hoses
kInked
. Is the Cycle Control Knob set and
pulled out?
IF YOUR WASHER DOES NOT SPIN:
l
Is the Ird closed?
l
Is the power supply cord
plugged in?
. Is a fuse blown or crrcurt-breaker
tripped?
IF YOUR WASHER STOPS DURING
THE PERMANENT PRESS CYCLE:
. Remember, the washer will stop
for about 1’2 minutes after the
partial dram during the cool-
down period in this cycle.
IF WASHER FILLS AND DRAINS
WITHOUT RUNNING:
l
Make sure that the Cycle Control
Knob IS pointing to a number In
the cycle
MAKE SURE THE DRAIN HOSE IS
HIGHER THAN THE WATER LEVEL IN
THE WASHER. IF IT ISN’T...
l
The washer may seem to be
draining during wash and rinse
cycles.
. Water can siphon out (See “ln-
stallation Instructions:‘)
l
Are both water faucets open?