Filter
Top Products
Using your Washer
Your automatic \Lail?er is easy +I:
use To make IT even easier reaa the
following steps before starting your firs+
load
Start your washer after you put in
detergent, the load, and any other
laundry aids according to InformatIon
on page 3 and page 6
1.
Set the LOAD SIZE SELECTOR.
l
Select the water level that matches
the size of the load See poge 5 for
more information
l
To change the setting on the LOAD
SIZE SELECTOR, first move it to RESET
Then move it back to the setting you
want
IMPORTANT For the best cleaning
sure the load has enough water for
2. Set the TEMPERATURE SELECTOR.
l
Match the wash and rinse water tem-
peratures to the type of fabrics and soils
being washed. [See the Instructions
under the washer IId and on page 14 lr
your ioundry
Guide )
l
Be sure to use a cold rinse for PERMA~
NENT PRESS and KNITS GENTLE Cycles
3. Select a Cycle and Start the
Washer.
l
Push the Cycle Control Knob in and
turn it to the right (clockwise)
l
Stop when the pointer IS on the
num
Ser of
mninutes
of wushing you want
In the cycle you want.
l
Instructions for which cycles to use for
each fabric type are under the lld
l
To start the washer, pull the Cycle
Control Knob out When the cycle IS
over, the washer will stop.
l
To stop the washer at any time
during a cycle, push the Control
Knob in.
Pull It out to restart the washer
l
To change a setting,
push the Con-
trol Knob In to stop the washer Then turn
the Control Knob to the right (clockwlse)
to the setting you want Pull the knob
out to start the washer
l
Pages 8- 9 show what happens In
each cycle
4