Filter
Top Products
Using your Washer
1
Your automatic washer IS easy to
use. To make ii even easier, read the
followlng steps before starting your first
load.
Start your washer after you put In
detergent, the load, and any other
laundry alds according to information
on pages 3,5,6 and 7.
1.
Set the LOAD SIZE SELECTOR.
l
Select the water level that matches
the size of the load See page 5 for
more information
l
To change the setting on the
LOAD
SIZE SELECTOR,
first move it to RESET
Then move it back to the setting you
want
IMPORTANT For the best cleaning
sure the load has enough water for
2. Set the TEMPERATURE SELECTOR.
l
Match the wash and rinse water tem-
peratures to the type of fabrics and soils
being washed. (See the Instructions
under the washer Ild and on page 14 In
your Laundry Guide
l
Be sure to use a cold rinse for PERMA-
NENT PRESS and KNITS GENTLE
Cycles
‘2
3. Select a Cycle and Start the
Washer.
l
Push the Cycle Control Knob in and
turn It to the right (clockwise).
l
Stop when the pointer is on the numb
ber of minutes of washing you want
In the cycle you want
l
Instructions for which cycles to use for
each fabric type are under the lid.
l
To start the washer, pull the Cycle
Control Knob out. When the cycle IS
over, the washer WIII stop.
l
To stop the washer at any time
during a cycle, push the Control
Knob in.
Pull it out to restart the washer.
l
To change a setting,
push the Con-
trol Knob in to stop the washer. Then turn
the Control Knob to the right (clockwlse)
to the setting you want. Pull the knob
out to start the washer.
l
Pages&II show what happens In
each cycle.
Water levels and
load Sizes
The
LOAD SIZE SELECTOR
lets
you control the amount of water that fills
the washer. The selector can be set at
any water level between
HANDWASHA-
BLE
and
LARGE.