Filter
Top Products
Operating instructions
Starting Your Washer
Be sure to measure and add detergent, then place
a sorted load in the washer before starting it.
1
. Select a LOAD SIZE
2
Select
. WATER TEMPERATURES
l
Turn the knob to point to a
setting that describes the size
of load you want to wash.
l
Set the knob on or between
EX SMALL (a few small items]
and LARGE (a full load].
I
NOTE: Use the LARGE water level
for best permanent press results.
I
l
Match the wash and rinse water
temperature to the type of fabrics and
soils being washed.
l
All rinses are cold. Cold rinses save
energy and help prevent wrinkles from
setting into fabrics.
l
This drawing shows a warm wash
(top temperature) and cold rinse
(bottom temperature) selection.
Recommended wash temperatures
can be found in your “Laundry Guide.”
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
0
CAUTION:
DO NOT
OVERLOAD WASHER.
*Approximate ,
LARGE
m-
(17.3 gal./655 L)’
fill with load.
(14.7 gaU55.7 L)*
(12.1 galI45.8 L)’
EFSMALL (9.5 gal.136.0 L)’