Filter
Top Products
If you need service or assistance, we suggest
you follow these four steps:
1. Before calling for
assistance...
Performance problems often result
from little things you can find and fix
yourself without tools of any kind.
If your washer does not fill:
l
Is the power supply cord plugged
into a live circuit with the proper
voltage?
l
Are both water faucets open?
l
Have you checked your home’s
main fuses or circuit breaker box?
. Are the water supply hoses kinked?
l
Is the Cycle Control Knob set and
pulled out?
If your washer does not spin:
. Is the lid closed?
l
Is the power supply cord plugged
into a live circuit with the proper
voltage?
l
Have you checked your home’s
main fuses or circuit breaker box?
If your washer stops during a cycle:
. Remember, the washer pauses
briefly at different times in each cy-
cle. These pauses are normal.
If your washer fills and drains with-
out running:
l
Make sure that the Cycle Control
Knob is pointing to a number in the
cycle.
Make sure the drain hose is higher
than the water level in the washer. If
it isn’t...
l
The washer may seem to be drain-
ing during wash and rinse cycles.
l
Water can siphon out. (See “lnstalla-
tion Instructions:‘)
14