Filter
Top Products
Operating instructions
Starting Your Washer
Be sure to measure and add detergent, then place
a sorted load in the washer before starting it.
1
2
Select
. Select a LOAD SIZE . WATER TEMPERATURES
l
Turn the knob to point to a
l
Match the wash and rinse water
setting that describes the size
temperature to the type of fabrics and
of load you want to wash.
soils being washed.
l
Set the knob on or between
EX SMALL [a few small items)
l
This drawing shows a warm wash
and LARGE (a full load).
(top temperature] and cold rinse
(bottom temperature] selection.
NOTE: Use the LARGE water ievel
Recommended wash temperatures
for best permanent press results.
can be found in your “Laundry Guide:’
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
‘Approximate
fill with load.
0
CAUTION:
DO NOT
OVERLOAD WASHER.
LARGE
(17.3 gals./655 L)*
(13.4 gals./50.8 L)*
EiSMALL (9.5 galsJ36.0 L)’