Filter
Top Products
Starting your washer
Before starting your washer:
I. Measure and add detergent.
2. Place sorted load in washer.
3. Start washer.
Select a
Select WATER
1. LOAD SIZE
2.
TEMPERATURES
l
To change the setting on the LOAD
SIZE SELECTOR, turn the knob to RESET.
l
Then turn the knob to point at a
setting that describes the size of the
load you want to wash.
. Set the knob anywhere on or be-
tween HAND WASHABLE (a few small
items) and EX LARGE (a full load).
See your “Laundry Guide” for details
on load sizes.
l
Select wash and rinse water tem-
peratures by pushing a button.
l
This drawing shows a warm wash
(top temperature) and cold rinse
(bottom temperature] selection.
Recommended wash temperatures
can be found in your “Laundry Guide”
and printed under the washer lid.
; LOAD SIZES AND WATER LEVELS
*
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
DO NOT
little water can cause wear or
OVERLOAD WASHER.
$
t
tearing of load items.
I
EX-LARGE (20.5 gals.177.6 L)’
I
*Approximate
MEDIUM (13.9 galsJ52.6 L)’
fill with load.
HAND WASHABLE (7.8 gals.129.5 L)’